cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Huge Buffer issue on 7600 with dual sup

Hello,

I am getting the follofing warning just after the boot on a 7600 when I use dual sup only :

*Apr 18 08:41:19.263: %CHKPT-SP-4-GET_HUGE_BUF: Client 163 buffer requested (size = 6160) is too large

*Apr 18 08:41:44.791: %ICC-SP-5-HUGE_BUFFER: Class [L2-DRV(FC)] with Request id 38 requested a huge buffer of Size 47280.

*Apr 18 08:42:59.175: %CHKPT-SP-4-GET_HUGE_BUF: Client 61 buffer requested (size = 4056) is too large

I have already seen other posts about this problem but only when a SPAN port was enabled. This is not my case, as this warning occured even with no specific configuration.

Software version is (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 12.2(33)SRE6, RELEASE SOFTWARE (fc1)

I do not get this warning if only one sup is inserted in the router (tested with both of them). Software version, memory... is the same on each sup.

Should I take care of this warning (or is it same bug as for SPAN ports) ?

Thanks

Who Me Too'd this topic