my environment:
IE-3000-8TC industry-switch
ios: ies-ipservicesk9-mz.150-2.SE2
if i do
vlan 12
name NextVLAN
state active
in putty, everything is ok. but if i set this lines in a config-file and use them by config net or copy tftp: running-config, then this commands are completely ignored.
does anybody know how to setup VLAN so that this are funktional. i dont need a "interface vlan xx"!
in addition manualy configured vlan are shown in show vlan command but there are no entries inside a sh running-config output even i user show running-config all.
whats wrong?
