cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

DISA STIG NET0965

joedansereau
Level 1
Level 1

I have a ASA-5510 (9.11-4-K8) monitoring a network that is required to use the DISA STIGs for certain security settings. there is a requirement (STIG ID NET0965) that requires the following:

The network device must be configured with a maximum wait time of 10 seconds or less to allow a host to establish a TCP connection.

Configure the maximum wait time for TCP connections to be established with the device to 10 seconds or less.

this is possible on a router or switch but can this be configured on the ASA?

Who Me Too'd this topic