07-17-2013 07:33 AM - edited 07-04-2021 12:26 AM
I have a CAP2602i that I would like to convert from lightweight to autonomous. Is this possible as with the older APs?
I'm following the instructions for the older models http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272 with the adjustment of renaming file ap3g2-k9w7-tar.152-2.JB.tar to ap3g2-k9w7-tar.default.
Here is my console output at the point that I am failing:
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7
-tar.default
examining image...
DPAA Set for Independent Mode
DPAA_INIT = 0x0
%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed o
ut)ap:
ap:
The IP address of my PC is set to 10.0.0.2. The max timeout I can set on my TFTP server is 20 seconds. Could this be my problem?
Thanks in advance! Any help would be apprectiated!