05-06-2013 09:19 PM - edited 07-04-2021 12:02 AM
Hello
Have 7.4 installed and configured for Bonjour Snooping. All is working, but working too well. We have a large campus that house 2 schools and each school is complaining that they can see the other schools AppleTV devices.
I have played around with a few different scenarios to see if I can localize the bonjour traffic.
I guess I am looking to create a logical split for bonjour devices amoung the schools.
Apple came to the school and informed us that the IPAD has a limit of 64 devices that can be seen via the bonjour. At some point we will have over 100 AppleTV added.
so we have 3 wlc 5508's with 7.4.100
we have 2 SSIDs that span the whole campus
using AP groups to segment the floors in buildings
So the schools are logically split with AP groups
Here is what I have tried
I created few mDNS profiles and assigned the services for Apple TV - let's call them school1 and school2
I assign the mDNS profiles to the interfaces dedicated each school
enable snooping on the WLAN with profile of none
The end result is that devices from both schools can be seen.
I tried to create new ssid for apple TVs and a new ssid for 1 schools teachers
I followed the vlan select example
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml
end result is that devices from both schools can be seen
I have tried the mDNS without multicast enabled just like the video shows to no avail - I assume maybe my AP groups might be more complicated then the example of just 2 vlans
I have tried combinations of things, but I must be missing something
In the webinar, Cisco said it will use filtering to restrict which clients can see which services (Apple TV's, etc). What will Cisco use to filter Bonjour requests?
according to this article
The filtering options are: · Per WLAN/SSID · Per VLAN or AP Group · Per Interface Group (which is a group of VLANs pooled together).
A Bonjour service policy can be created and applied on any one of the above criteria. In the future, we will support per-user Bonjour service policies which will come as a RADIUS attribute from the AAA server.
Cheers
Any insight would be appreciated
Solved! Go to Solution.