04-28-2013 06:39 AM - edited 03-10-2019 08:22 PM
I've ISE v1.1.2.145 and Cat 6500 IOS ADVENTERPRISEK9-M, Version 15.0(1)SY2
I'm trying to add 6500 in the trustsec group with ISE and followed the trustsec 2.1 documentation. After configuring it keeps on giving me error in the ISE logs below with the subject #CTSREQUEST#
11302 Received Secure RADIUS request without a cts-pac-opaque cisco-av-pair attribute
Below are the steps:
11001 Received RADIUS Access-Request |
11017 RADIUS created a new session |
15012 Selected Access Service - NDAC_SGT_Service |
11302 Received Secure RADIUS request without a cts-pac-opaque cisco-av-pair attribute |
Also after i configure cts credentials and radius-server pac command in 6500, it starts giving me log messages that radius is down and the next moment it comes up again. It is continously doing that.
Thanks in advance for the help.
Regards,
Zohaib
Solved! Go to Solution.