I HAVE asa5545 , i shutdown the ips , and unintsall the ips software module, and reload the asa, account to 9.1 configure cli guide, and upload the asa cx boot image, and reboot the cx module, wait 5 min, session cx console, i see the
# session cxsc console
Opening console session with module cxsc.
Connected to module cxsc. Escape character sequence is 'CTRL-^X'.
but there is no user/password prompt
i am expectiong the prompt to login . the session is just blank
I exist to ASA, and show module, it still show the cx module recover .
i tried many time, even reboot the ASA, Still can not see the user login prompt in the cx console ?
anyone know this problem ?
when I show the module,
isee
Mod Card Type Model Serial No.
---- -------------------------------------------- ------------------ -----------
0 ASA 5545-X with SW, 8 GE Data, 1 GE Mgmt ASA5545 FCH1705J14G
ips Unknown N/A FCH1705J14G
cxsc Unknown N/A FCH1705J14G
Mod MAC Address Range Hw Version Fw Version Sw Version
---- --------------------------------- ------------ ------------ ---------------
0 b0fa.eb97.b9f5 to b0fa.eb97.b9fe 1.0 2.1(9)8 9.1(2)
ips b0fa.eb97.b9f3 to b0fa.eb97.b9f3 N/A N/A
cxsc b0fa.eb97.b9f3 to b0fa.eb97.b9f3 N/A N/A
Mod SSM Application Name Status SSM Application Version
---- ------------------------------ ---------------- --------------------------
ips Unknown No Image Present Not Applicable
Mod Status Data Plane Status Compatibility
---- ------------------ --------------------- -------------
0 Up Sys Not Applicable
ips Unresponsive Not Applicable
cxsc Recover Not Applicable
