I have a router I was working on that has suddenly started to boot into ROMMON.
Readonly ROMMON initialized
rommon > 1
I can see the IOS file when I do a "dir flash0:"
that tells me the flash is acknowledged and read by the router.
I have used a known good flash and the router wont boot from it either. I can use the flash from the failed router to boot another identical router just fine.
I have looked at other forum discussions which has led me to ensure the CF is firmly seated, and the DIMMs as well.
Am i jumping the gun to think I havea router hardware problem?
Any ideas would be appreciated
Solved! Go to Solution.