cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

CUCME 9.1 TAR Checksum Failure

riedmueller
Level 1
Level 1

Hello,

Hoping for some help here - I have tried this multiple ways but had no success

I am trying to get CUCME 9.1 installed on a 2901 router. The router is running IOS 15.2(4)M2, and has the UCK9 feature permanently enabled. It has a 2GB flash drive.

I have downloaded CUCME 9.1 in the form of cme-152-4Mv1.rar at least 3 times onto various Windows 7 machines and either copied the TAR directly to the flash drive or put it onto a TFTP server.

The command I am using is straight out of the CME Administrator's guide " archive tar /xtract (source) (destination)        

Every time I try to extract the TAR file, there is an immediate " TAR Checksum Error " message, no matter the source of the file.

I have used an MD5 calculator and validated the downloaded copies of the tar match the MD5 values on the web page. I have further used 7zip to extract a copy of the tarball onto my hard drive, and everything seems to extract fine - files are there and I can open and read the .txt.

Any help would be greatly appreciated

Who Me Too'd this topic