Hi,
How I can use 3 different Subnets on HSRP protocol on my wan interface. HSRP protocol require virtual ip address in the same subnet as physical interface ip address. Following is my subnets detail. I assigned 50.2.3.49 to R1 and 50.2.3.50 to R2 with their subnet mask 255.255.255.240, but when I use 50.2.3.14 as virtual ip there is warning “Address is not within a subnet on this interface” I am using 50.2.3.14 as virtual IP because my ISP is routing all traffic coming for 50.2.3.49 – 62 and 50.20.7.1 – 62 to 50.2.3.14. please advise. or its OK it will work?
IPs Subnet mask Gateway
50.2.3.14 255.255.255.252 50.2.3.13
50.2.3.49 – 62 255.255.255.240
50.20.7.1 – 62 255.255.255.192
my default router as below
ip route 0.0.0.0 0.0.0.0 50.2.3.13
