11-15-2013 05:03 AM - edited 03-01-2019 07:27 AM
I bought 2 SUP2Es; they are factory installed with
Software
BIOS: version 2.11.0
kickstart: version 6.2(2)
system: version 6.2(2)
BIOS compile time: 01/09/2013
kickstart image file is: bootflash:///n7000-s2-kickstart-npe.6.2.2.bin
kickstart compile time: 7/9/2013 20:00:00 [08/14/2013 07:51:20]
system image file is: bootflash:///n7000-s2-dk9-npe.6.2.2.bin
system compile time: 7/9/2013 20:00:00 [08/14/2013 10:27:51]
I want to upgrade the system to NX-OS
6.2(2a )
n7000-s2-dk9.6.2.2a.bin
Using the following command I get an error message
switch# install all kickstart bootflash:n7000-s2-kickstart.6.2.2a.bin system bootflash:n7000-s2-dk9.6.2.2a.bin
Installer will perform compatibility check first. Please wait.
Verifying image bootflash:/n7000-s2-kickstart.6.2.2a.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n7000-s2-dk9.6.2.2a.bin for boot variable "system".
[# ] 0% -- FAIL.
Return code 0x40930077 (Install is not supported between NPE and non-NPE system image).
Pre-upgrade check failed. Return code 0x40930011 (Image verification failed).
HOW CAN I CHANGE TO NON NPE Softwareversion ?
Thanks in advance
Manfred