cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Help for C3825 system crash!!

justlaicvtc
Level 1
Level 1

Here's the 3825 log sesstion

please help me for find problem!

after crash , i have upgrade the rommon

because the old rommon cannot read flash in rommon mode

but when i upgrade the rommon to the newest version

it was also can not read flash

and i upgrade the ios 12.4(9T) to 15.1(M5) it was no any problem

but two days later it was continuous reboot

and cannot load the ios, please help me thanks a lot!

A Board  僠療

**僠€

                       

*** Emulating mis-aligned store at 0xff

*** Emulating mis-aligned store at 0xfffffcfc

    PC = 0xbfd83f50 ... failed, opcode = 0xc

ROM Monitor Can Not Recover From Exception

A Board

*** Emulating mis-aligned store at 0x001ffffd

    PC = 0xbfc03f54 ... failed, opcode = 0x5

ROM Monitor Can Not Recover From Exception

A B

*** Machine Check Exception ***

  PC = 0xbfd82e68, SP = 0x800002b0, RA = 0xbfd82e70

  Cause Reg = 0x00008060, Status Reg = 0x30400002

ROM Monitor Can Not Recover From Exception

A Board

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2010 by cisco Systems, Inc.

System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2010 by cisco Systems, Inc.

*** Watch Dog Timeout Reset ***

ra = 0xb5bfffff, EPC = 0xffffffdf

*** BCM 1125 went through a full reset. HT/PCI fabric reset. ***

*** Bus Error (Load) Exception ***

Access address = 0x0

  PC = 0x9fd816a0, SP = 0x8000cf40, RA = 0x9fd89a94

  Cause Reg = 0x0000041c, Status Reg = 0x30408003

ROM Monitor Can Not Recover From Exception

A Board

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

*** TLB (Store) Exception ***

*** Emulating mis-aligned store at 0x00000002om Exception 瞬貙

    PC = 0xbfd83f4c ... failed, opcode = 0x37

ROM Monitor Can Not Recover From Exception

A Board

*** TL

System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2010 by cisco Systems, Inc.

*** Watch Dog Timeout Reset ***

ra = 0x41000, EPC = 0xffffffff

*** BCM 1125 went through a full reset. HT/PCI fabric reset. ***

*** Emulating mis-aligned store at 0xfffffcfc

    PC = 0xbfd83f50 ... failed, 瞬

*** TLB (Store) Exception ***

Access address = 0x4848

System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2010 by cisco Systems, Inc.

*** Watch Dog Timeout Reset ***

ra = 0xbfff7ffa, EPC = 0xffffffdf

*** BCM 1125 went through a full reset. HT/PCI fabric reset. ***

Total memory size = 512 MB - DIMM0 = 0 MB, DIMM1 = 512 MB

c3825 platform with 524288 Kbytes of main memory

Main memory is configured to 0/72(dimm 0/1) bit mode with ECC enabled

Upgrade ROMMON initialized

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

*** E艛貙貙貙貙貙貙 貙貙貙貙貙

                              System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2010 by cisco Systems, Inc.

*** Watch Dog Timeout Reset ***

ra = 0x41000, EPC = 0xffffffff

*** BCM 1125 went through a full reset. HT/PCI fabric reset. ***

擬 瞬

System Bootstrap, Version 12.4(13r)T15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2010 by cisco Systems, Inc.

*** Watch Dog Timeout Reset ***

ra = 0xb73ffbde, EPC = 0xffffffdf

*** BCM 1125 went through a full reset. HT/PCI fabric reset. ***

*** Bus Error (Load) Exception ***

Access address = 0x0

  PC = 0x9fd816a0, SP = 0x8000cf40, RA = 0x9fd89a94

  Cause Reg = 0x0000041c, Status Reg = 0x30408003

ROM Monitor Can Not Recover From Exception

A Board

System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

*** Emulating mis-aligned load at 0x00841000

    PC = 0x00841000 ... 鸆僯纚

*** Emulating mis-aligned store at 0xfffffcfc

Who Me Too'd this topic