cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Beginner

Cisco ASA5505 Unable to Boot

Hi,

I had a unit of Cisco ASA5505 firewall unable to complete the boot up and display error message as below:

i2c_read_byte_w_wait() error, slot = 0x4, device = 0xa0, address = 0 byte count

= 1. Reason: I2C_HOST_BUSY_ERROR

Failed to read offset 0 from IDPROM ARRAY slot 0,I2C addr 0x4, dev 0xa0, error 5

纃osfsck 2.11, 12 Mar 2005, FAT32, LFN

Starting check/repair pass.

Starting verification pass.

/dev/hda1: 306 files, 16520/62780 clusters

dosfsck(/dev/hda1) returned 0

lina_bigphysarea_size: open /proc/bigphysarea failed, error 2

Rebooting.....

CISCO SYSTEMS

Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB

High Memory: 507 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  01  00   1022   2080  Host Bridge

00  01  02   1022   2082  Chipset En/Decrypt 11

00  0C  00   1148   4320  Ethernet           11

00  0D  00   177D   0003  Network En/Decrypt 10

00  0F  00   1022   2090  ISA Bridge

00  0F  02   1022   2092  IDE Controller

00  0F  03   1022   2093  Audio              10

00  0F  04   1022   2094  Serial Bus         9

00  0F  05   1022   2095  Serial Bus         9

Evaluating BIOS Options ...

Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

i2c_read_word_w_wait() error, slot = 0x0, device = 0x64, address = 134 byte coun

t = 2. Reason: I2C_HOST_BUSY_ERROR

Platform ASA5505

Use BREAK or ESC to interrupt boot.

Use SPACE to begin boot immediately.

Launching BootLoader...

Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /asa825-k8.bin... Booting...

i2c_read_byte_w_wait() error, slot = 0x0, device = 0xa0, address = 0 byte count

= 1. Reason: I2C_HOST_BUSY_ERROR

platform_init_from_idprom: i2c_error 5

Platform

Loading...

i2c_read_byte_w_wait() error, slot = 0x0, device = 0xa0, address = 0 byte count

= 1. Reason: I2C_HOST_BUSY_ERROR

platform_init_from_idprom: i2c_error 5

=

Anyone face same issue as mine?

Who Me Too'd this topic