Hi Team
I have a router that receive the E1, I did had 20 digital lines, but now are increased at 30 digital lines, I need configure the controller E1 for receive the 30 digital lines. I´m trying to configure this but I see errors in the CLI:
1.- voice-port 0/0/0:0
no shut
2.-controller E1 0/0/0:0
ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani -> no accept this command because the voice-port no exist
from here I can not advance,I do not know what commands missing.
Thank you for response.
Regards
