Hello,
I am fighting to get an 1140 LAP attached to a 5508 WLC running code 7.4.110.0.
Here is what I get on the AP logs:
*Nov 12 08:39:00.106: %CAPWAP-3-ERRORLOG: Selected MWAR 'gvenwc0006'(index 0).
*Nov 12 08:39:00.106: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Nov 12 08:39:01.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
*Nov 12 08:39:01.889: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
*Nov 12 08:39:01.890: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Nov 12 08:39:02.000: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Nov 12 08:39:02.000: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Nov 12 08:39:02.000: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Nov 12 08:39:02.000: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7
*Nov 12 08:39:06.889: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Nov 12 08:40:00.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
*Nov 12 08:40:01.053: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Nov 12 08:40:01.101: Starting Ethernet promiscuous mode
*Nov 12 08:40:11.107: %CAPWAP-3-ERRORLOG: Selected MWAR 'gvenwc0006'(index 0).
*Nov 12 08:40:11.107: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Nov 12 08:40:11.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
*Nov 12 08:40:11.885: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
*Nov 12 08:40:11.886: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Nov 12 08:40:11.968: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Nov 12 08:40:11.968: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Nov 12 08:40:11.968: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Nov 12 08:40:11.968: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7
I already tried to erase the lwap configuration of the AP, to reload it, etc. But no success.
Can anyone help me ?
Many thanks,
David
