11-20-2013 11:04 PM - edited 03-16-2019 08:31 PM
Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.