05-27-2014 04:14 PM - edited 03-07-2019 07:33 PM
Hi!
We are implementing a project with the new Catalyst 6807-XL switches and 40G CFP-40G-SR4 optics inserted in the WS-X6904-40G linecards.
We've tested conectivity between two 40G CFP optics using a MMF OM4 50 microns MPO-MPO jumper and the test was unsuccessful, The electronics seem to be working all right, so we suppose it's a problem with the jumper.
Have you had any experience regarding this 40G optics conectivity?
Thanks & regards!