04-14-2014 07:37 AM - edited 03-11-2019 09:04 PM
Hi,
I have a communication problem from the ASA CX boot image and can not install the SW because of that.
I'm following the quick setup guide: http://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/cx/cx_qsg.html#wp51233
On the CX I can't ping the network or the DefGW. But when I ping from the network and (of course) the DefGW I get a reply from the CX module.
I'm a bit lost so what could be blocking the traffic for the CX module? Anything in ASA as of this being a SW module?
Running ASA 5525-X 9.1(4) and ASA CX 9.2.1.2-77 boot image.
Ping from CX (172.16.1.113)
asa-cx-02-boot>ping 172.16.1.1
PING 172.16.1.1 (172.16.1.1): 56 data bytes
--- 172.16.1.1 ping statistics ---
7 packets transmitted, 0 packets received, 100% packet loss
Ping from DefGW. (172.16.1.1)
Core#ping 172.16.1.113
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.113, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/5/9 ms
Any help appreciated.
Cheers
Solved! Go to Solution.