cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Mapped drives do not open after connecting via Cisco VPN Client

arnoldcarino
Level 1
Level 1

I have an issue when I initially connect to my remote network, I cannot get to any mapped drive unless I wait a few minutes for the VPN connect to mature. To explain further, I have to wait 2-4 minutes after connecting to the VPN for me to actually connect to those drives.

 

The error that pops up is:

"An error occurred while reconnecting to DriveLetter: to \\Server\sharedDrive\    Microsoft WIndows Network: The network path was not found. This connection has not been restored.

 

Now, immediately after  I connect, I am able to successfully ping the server that hosts those folder locations but for some reason I cannot get to the server via UNC/shared drives until I wait a few minutes after connecting. 

 

Below is the list of error logs I get when attempting to connect to the mapped drives during those first few minutes of connectivity:

 

1      15:26:39.804  10/06/14  Sev=Warning/3 IKE/0xA300005F
 
Firewall, Sygate Security Agent, is not running, the client will not send firewall information to concentrator.
 
 
 
2      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
3      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
4      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
5      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
6      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
7      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
8      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
9      15:28:10.614  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
10     15:28:17.188  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
11     15:28:17.188  10/06/14  Sev=Warning/2 IPSEC/0xE3700003
 
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
 
 
 
12     15:33:50.642  10/06/14  Sev=Warning/2 CVPND/0xA3400015
 
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=192.168.11.120, error 0
 
 
 
13     15:33:51.656  10/06/14  Sev=Warning/2 CVPND/0xA3400015
 
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
 
 
 
14     15:35:16.855  10/06/14  Sev=Warning/3 IKE/0xA300005F
 
Firewall, Sygate Security Agent, is not running, the client will not send firewall information to concentrator.
 
 
 
 
 
 
 
Any ideas on what it could be?
Who Me Too'd this topic