08-29-2014 12:15 AM - edited 03-04-2019 11:39 PM
Hi,
Here in our company we have a router that is connected to 2 eBGP peers, lets say that the first peer is 1.1.1.1 and the other is 2.2.2.2. Currently, we are receiving and using a default route to 1.1.1.1, this make the 2.2.2.2 not utilized. So what we did is create a route-map that sets the ip next-hop to 2.2.2.2
example:
access-list 1 standard pernit 200.200.200.200
route-map BROWSE permit 10
match ip address 1
set ip next-hop 2.2.2.2
I wonder what happens when the 2.2.2.2 ISP goes down, will it failover to ISP1? If not is there a way of doing this type of setup with failover without using IP SLA?
Thanks.
Solved! Go to Solution.