dears,
Please note that the LAN interface (GigabitEthernet0/2) on our 2911 router is hanging. the interface stays up/up but is not reachable and stops passing traffic. the issue is temporary resolved after putting the interface in default configuration and reapplying back the configuration.
shut/no shut and router reload does not resolve the issue.
interface GigabitEthernet0/2
description connected to LAN
ip address 10.1.184.2 255.255.255.0
ip nat inside
ip inspect mea in
ip virtual-reassembly in
standby 1 ip 10.1.184.1
standby 1 priority 110
standby 1 preempt
standby 1 track 100 decrement 50
load-interval 30
duplex auto
speed auto
IOS used: c2900-universalk9-mz.SPA.151-4.M8.bin
Please advise.
thank you in advance.
