Hello.
I have a problem setting Management interface IP in new controller 5508. I get the error "Error in setting management interface IP".I can not place a management controller IP.
Starting IPv6 Services: ok
Starting Config Sync Manager : ok
Starting Hotspot Services: ok
Starting PMIP Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
Web Server: CLI: ok
Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
License Agent: ok
(Cisco Controller)
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
Would you like to terminate autoinstall? [yes]: -
Invalid response
Would you like to terminate autoinstall? [yes]: no
System Name [Cisco_bf:dd:c4] (31 characters max):
AUTO-INSTALL: process terminated -- no configuration loaded
Enter Administrative User Name (24 characters max): admin
Enter Administrative Password (3 to 24 characters): ********
Re-enter Administrative Password : ********
Service Interface IP Address Configuration [static][DHCP]: none
Service Interface IP Address: 1.1.1.1
Service Interface Netmask: 255.255.255.0
Enable Link Aggregation (LAG) [yes][NO]: no
Management Interface IP Address: 192.168.10.1
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 192.168.10.10
Error in setting management interface IP
Management Interface IP Address: 10.10.10.1
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 10.10.10.100
Error in setting management interface IP
Management Interface IP Address:
····························································································
Does anyone faced this issue?
Thanks.
