Hello,
We use Cisco ISE 1.2.0.899 on our network (we plan to upgrade to 1.3 in some months).
Our network includes Cisco models 2960S (and some 2960T) about wired and 2602I (with WISM2) about wireless.
We have to allow PXE boot on one (or many) VLAN.
Do you know what's the best practice to use PXE on a 802.1X network ?
Does ISE and/or Switch can recognize PXE request?
Do we have to use settings/rules into ISE or on Switch?
Does the easy way is to allow PXE on WebAuth VLAN?
Regards,
Chris
