Hi,
Does anyone know how to remove "rtpmap: 100 X-NSE/8000" and keep only "rtpmap:101 telephone-event /8000" in SDP message?
I have tried this "voice-class sip dtmf-relay force rtp-nte" but did not work.
I am using Cisco AS5400 Version 12.4(11)T4.
dial-peer voice 1798557 voip
description Test via Testing
translation-profile outgoing 389855
huntstop
preference 1
destination-pattern 989610106
voice-class codec 9
voice-class h323 1
voice-class sip rel1xx disable
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:xxx.xxx.xxx.xxx
dtmf-relay rtp-nte
Thanks,
Seng
