11-26-2014 12:03 AM - edited 03-03-2019 07:40 AM
Hi,
#sho ver
produces this error, before outputting the rest of the expected results of a sho ver:
Ver read taking too long. Aborting
proton_firmware_version_read failed asic 3
then the rest is shown:
Cisco Nexus Operating System (NX-OS) Software........
......
What is the issue? It's happening on a pair of N5K's, so it's not likely a single hardware failure issue, but a config issue....
NX-OS system: version 6.0(2)N2(2)