Dear all
When I try to Check show isdn command It is not working ,Every time I no shut controller interface serial interface will be up and after some time
agan it will be down.
troller)#
Jan 26 19:57:01.895: %LINK-3-UPDOWN: Interface Serial0/0/0:0, changed state to up
Jan 26 19:57:02.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:0, changed state to up
Jan 26 19:57:10.151: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 10 to priority 1
Jan 26 19:57:29.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:0, changed state to down
Regards,
Ajay Jose K
