cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Zero Touch Deployment ( ZTD) Cisco ISR

Adrian Lazar
Level 1
Level 1

Hi,

 

I am trying to setup ZTD with two types of ISR routers, C891/892 and C891-24x - also known as the swouter - but I am having a hard time so far. I tried USB ZTD and AutoInstall options as described in the document below but it seems that the routers do not behave as described.

http://www.cisco.com/c/dam/en/us/td/docs/routers/access/800/hardware/deployment/guide/deployguide800.pdf

What I mean is they are not trying to obtain an IP address via DHCP ( for AutoInstall) or boot from USB when there is no startup-config and a xxx.cfg file is present on the USB drive.  Also, I read about some incompatibilities between Cisco Configuration Professional Express and AutoInstall but this should not affect the USB ZTD function. 

 

Any idea would be highly appreciated. 

 

Thanks,
Adrian

Who Me Too'd this topic