Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

Help me to create IPv4 based ACLs for VLANs using GUI



I’m using Cisco SG500 in layer 3 mode and created different VLANs. Now I want to create IPv4 based ACLs and apply to those VLANs to restrict access.

The VLANs are as per below.

  1. Internet VLAN 1 = and Internet router IP is
  2. Server VLAN 10 =
  3. Workstation VLAN 11 =
  4. Workstation VLAN 12 =
  5. Workstation VLAN 13 =
  6. Workstation VLAN 14 =
  7. Guest VLAN 15 =

I’m using built-in DHCP server feature of SG500 so all DHCP Pools are configured on the switch itself.

Now I want all members within workstation VLANs to get IPs from the DHCP Pool and only access Internet & Servers and nothing else.

Also, I want all members with in Guest VLAN to get IPs from their DHCP Pool and access only Internet and nothing else.

Is anybody show me how to configure IPv4 based ACLs with minimum ACEs for above scenario? but using only web GUI interface as I don’t have knowledge of CLI.

Thanks in anticipation.



Who Me Too'd this topic