04-16-2015 04:27 AM
Hi every one,
I'm using a cisco router RV130, which runs the latest firmware (1.0.1.3), and when
I set an IP address to the LAN interface, I can't choose the subnet mask greater than /24.
The scrolling list proposes only these values :
255.255.255.0
255.255.255.128
255.255.255. .. and so on to 255.255.255.252
The issue is that the customer's lan address is 172.17.0.0/16 (255.255.0.0)
Any clue ?
Thierry
Solved! Go to Solution.