Hello Cisco Support Community, Im performing my CIPT1 Lab configuring a MGCP GW (C2811 - c2800nm-adventerprisek9-mz.124-22.T4.bin) in my CUCM (8.6.2.22900-9), but I had some issues with the registration of the GW.
The first one happened when I tried to use the Configuration Server method in the GW, at the beggining the GW received a sort of MGCP commands, except "mgcp", so the GW at IOS level never appeared as "registered" in #sh ccm-manager. Fortunately, I was able to solve it only activation the "mgcp" command and the GW appears registered in #sh mgcp and #sh ccm-manager.
However, at CUCM level, even with the "registered" state in the GW, the GW apears "unregistered". I tried:
- The following workaround of restarting the Cisco RIS Data Collector Service but didnt work: http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/68240-mgcp-gtwy-reg-failure.html
- Bind the interfaces for MGCP and didnt work , either: https://supportforums.cisco.com/discussion/11413126/voice-gateway-unregistered
I really appreciate your help or advice.
Regards.
