07-28-2015 06:28 PM
I have tried to restrict network access with single destination IP deny rules that have no effect on traffic. I have a RV325 with the latest firmware
Firmware Version: | v1.2.1.13 (2015-05-04, 18:40:51) |
Even when I added deny all rule #1 (see attached file), nothing is effected. Am I doing something wrong or is this something wrong with the router? I have work for years with other firewall tables and my RVS4000 worked the way I expected until I replaced it with this.
Access Rules Table | Items 1-5 of 8 per page |
Priority | Enable | Action | Service | Source Interface | Source | Destination | Time | Day | |
---|---|---|---|---|---|---|---|---|---|
Deny | All Traffic [1] | * | Any | Any | Always | ||||
Allow | All Traffic [1] | LAN | 192.168.3.1/255.255.255.0 | Any | Always | ||||
Allow | All Traffic [1] | LAN | 192.168.2.1/255.255.255.0 | Any | Always | ||||
Allow | All Traffic [1] | LAN | 192.168.4.1/255.255.255.0 | Any | Always | ||||
Deny | All Traffic [1] | USB1 | Any | Any | Always |