05-05-2015 07:43 AM
We have encountered the following message during the boot-up of the A9K-2T20GE-L blade in the ASR-9010 unit with the A9K-RSP440.
The IOS is 5.1.3. The same message happens with A9K-RSP440-TR and A9K-RSP440-SE. Once the blade boots up completely, it seems to operate normally.
=======================================================
LC/0/5/CPU0:May 4 11:50:19.305 : pfm_node_lc[279]: %PLATFORM-LC_CPUCTRL-2-TX_RX_PAR_ERROR : Set|mace[49194]|0x100f000|LC CPU controller driver detected Tx/Rx parity error
LC/0/5/CPU0:May 4 11:50:19.324 : pfm_node_lc[279]: %PLATFORM-LC_CPUCTRL-2-TX_RX_PAR_ERROR : Clear|mace[49194]|0x100f000|LC CPU controller driver detected Tx/Rx parity error
LC/0/5/CPU0:May 4 11:50:20.702 : pfm_node_lc[279]: %PLATFORM-LC_CPUCTRL-2-TX_RX_PAR_ERROR : Set|mace[49194]|0x100f000|LC CPU controller driver detected Tx/Rx parity error
LC/0/5/CPU0:May 4 11:50:20.702 : pfm_node_lc[279]: %PLATFORM-LC_CPUCTRL-2-TX_RX_PAR_ERROR : Clear|mace[49194]|0x100f000|LC CPU controller driver detected Tx/Rx parity error
LC/0/5/CPU0:May 4 11:50:24.271 : pifibm_server_lc[280]: %OS-PLATFORM_LPTS_PIFIB-4-ERR_INVALID_POLICER_RATE_BURST : Policer Burst 7d0 is more than Policer Rate 3e8: Re-setting the Burst to PolicerRate
LC/0/5/CPU0:May 4 11:50:29.184 : pfm_node_lc[279]: %PLATFORM-LC_CPUCTRL-2-TX_RX_PAR_ERROR : Set|mace[49194]|0x100f000|LC CPU controller driver detected Tx/Rx parity error
LC/0/5/CPU0:May 4 11:50:29.184 : pfm_node_lc[279]: %PLATFORM-LC_CPUCTRL-2-TX_RX_PAR_ERROR : Clear|mace[49194]|0x100f000|LC CPU controller driver detected Tx/Rx parity error
=========================================================
Let me know what can be done to eliminate these messages.