Hii
i am try to convert AIR-AP1041N-E-K9 autonomous to Lightweight (Controller Base). i was successfully upgraded but it can not find the WLC IP.
I don't know why it happen. i have also check the switch and found it is fine and DHCP is enable.
i have also create a DHCP pool in my WLC.
But still it can find any IP address via WLC.
It shows the following error:
*Dec 17 11:27:49.827: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
Please check the attachments.
Regard
Yasib
