cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

%STORM_CONTROL-3-FILTERED: A Unicast storm detected on

Goodday,

For some days i'm getting the following "error"  message on the switch

%STORM_CONTROL-3-FILTERED: A Unicast storm detected on GI0/47  A packet filter action has been applied

Port 0/47 is connected to a another switch with the following stormcontrol configuration. 

storm-control broadcast level 30.00
storm-control multicast level 40.00
storm-control unicast level 70.00

my question is how to troubleshoot on the switch which is connected to GI0/47  which device is causing the unicast traffic.

Thanks in advance

Topcu

Who Me Too'd this topic