03-14-2016 12:01 PM - edited 03-05-2019 03:33 AM
Dear All,
We have Nexus 93128 switches running on vPC.
Recently , we have done a network up grataion activity , during that time Nexus-9K-1 switch was powered Off.
After completion of activity. VPC role is showing like below. What exactly should be done to change the functional role of nexus switches or what need to be done to bring back these nexus switches as they were initially. for eg ,..
Nexus-9K-1 was at primary role.
Nexus-9K-2 was at secondary role.
Nexus-9K-1# sh vpc role
vPC Role status
----------------------------------------------------
vPC role : primary, operational secondary
Dual Active Detection Status : 0
vPC system-mac : 00:21:02:de:c3:5f
vPC system-priority : 4096
vPC local system-mac : ef:78:24:e7:b7:78
vPC local role-priority : 1
Nexus-9K-1#
Nexus-9K-2# sh vpc role
vPC Role status
----------------------------------------------------
vPC role : secondary, operational primary
Dual Active Detection Status : 0
vPC system-mac : 00:21:02:de:c3:5f
vPC system-priority : 4096
vPC local system-mac : e1:2e:2a:5c:4d:3b
vPC local role-priority : 2
Nexus-9K-2#
Rgds
JN
Solved! Go to Solution.