cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

VSS' Issue for Catalyst 6880-X-LE

wangchunhao20001
Beginner
Beginner

Hi there,

I met an issue regarding VSS established on Catalyst 6880-X-LE, please give me any suggestions or comments you have. I appreciate that. 

Here is my scenario and configuration as below:

2*Catalyst 6880 are running IOS (c6880x-adventerprisek9_npe-mz.SPA.151-2.SY6.bin) and connect to each other through 2 10 Gigabit Ethernet Ports on both supervisors. 

C6880-1:

switch virtual domain 10

switch 1

interface Port-Channel 1

switch virtual link 1

no shut

interface range tengiabitEthernet 5/1-2

channel-group 1 mode on

no shut

Interfaces and Port-Channels are up.

"show switch virtual", then exports:

Standalone Not in Virtual Switch mode due to: Domain ID is configured but SWITCH_NUMBER is not set. This implies an incomplete or failed Virtual Switch conversion process.

Then, tried the commands: “switch set switch_num 1” under the "Privileged Exec mode" according to Cisco's document suggestion for the new supervisor . 

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Campus/VSS30dg/campusVSS_DG/VSS-dg_ch2.html

"show switch virtual"  again, then export:  Switch Mode : Standalone  Not in Virtual Switch mode due to:   Domain ID is configured. This implies an incomplete or failed Virtual Switch conversion process.

C6880-2:

switch virtual domain 10

switch 2

 

interface Port-Channel 2

switch virtual link 2

no shut

 

interface range tengiabitEthernet 5/1-2

channel-group 2 mode on

no shut

show switch virtual 

The same exports as C6880-1 did. 

Thanks,

Bob

Who Me Too'd this topic