Hello,
I've just installed from ova file a CSR 1000V in my personal lab into an ESXi.
I followed this link:
http://www.fryguy.net/2013/12/27/cisco-csr1000v-for-home-labs/
I do have an interface Giga 1 in default vlan with adapter type VMXNET3 as it's suggested.
Whenever I turn on the CSR I configure the interface and I unshut it. Negotiation is auto (I tried to hard link it but w/o success).
Problem is that from my pc I can't ping the giga1 CSR interface and viceversa. But on both side I see the arp of the interface.
I tried to change adapter type on vmware (VMXNET2 or E1000) but with no help..
If I turn on a debian or Windows VM on the same nic card on the same vlan I can ping it or reach it.
I've tried to debug the ip packets but nothing shows up some issues.
Config is a default one... there are no acls, not security features, nothing.. just an ip address on the giga1 and the no shut command.
What could be?
Thanks in advance
