07-06-2016 04:25 PM - edited 03-18-2019 12:01 PM
Hi everyone,
I tried to resolve ths issue that I have with my CME 10.5 running on my Cisco 2911 with Version 15.4(3)M3
I'm using SIP Phones 7821 on it.
I'm already follow this LPCOR Configuration Example and when I apllied this configuration to my Dial-Peer, I get the Debug that I paste after. I notice that the CME doesn't update my statistics on the output of LPCOR Stats and the call is not completed. Without applied the LPCOR outgoing parameter on Dial-Peer is possible make that call.
This configuration is not applied to all other DialPeers yet, because we are testing this configuration.
CME#show voice lpcor policy
voice lpcor policy P-FAC (group 4):
service fac is enabled
( accept fac ) IP-Phones (group 1)
( accept ) IP-Phones-SinFAC (group 2)
( accept ) P-FAC (group 4)
CME(config)#debug voice lpcor all
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_ipaddress:
ipaddress 192.168.61.72; vrf=0, host=; subnet_type=3
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_ipaddress:
Found lpcor index 0 for ipaddress 192.168.61.72
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_peer:
peer tag 40036, direction 0
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor IP-Phones
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor IP-Phones index 1
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_peer:
Return Lpcor Index 1 for Peer Tag 40036
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor P-FAC
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor P-FAC index 4
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_index_is_valid:
lpcor index 1 is valid
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_policy_validate_internal:
Source LPCOR Index=1, Target LPCOR Policy=P-FAC
*Jul 6 18:01:10: -Traceback= 36295A00z 3602E7FCz 36030C14z 36034534z 36034834z 36032C08z 36037954z 36007C7Cz 3600A964z 3600AC70z 3600DE44z 36051FF0z 360AA180z 360AE428z 36053318z 360B1E48z
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_policy_validate_internal:
Validate Pass; lpcor (source[1] target[4])
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/lpcor_policy_validate_get_service:
FAC is enabled; lpcor (source[1] target[4])
*Jul 6 18:01:10: //-1/xxxxxxxxxxxx/LPCOR/fac_stats_fail_update:
Fail Stats: CallType<Basic(0)>
Basic<8> Fwd<0>
CME#show voice lpcor statistics
Voice LPCOR statistics for failure calls:
Total basic calls: 0
Total forward calls: 0
Total transfer calls: 0
Total conference calls: 0
Total park retrieval calls: 0
Total pick up calls: 0
Someone Can help me if I making Something wrong?
Thanks in adveced for your help
Regards,
Gustavo