09-15-2016 07:38 AM - edited 03-17-2019 08:06 AM
Hello everyone,
I have an Xmedius Fax server that is connected with a SIP trunk to the CUCM cluster.
I am able to receive faxes no problem from the PSTN, but when I place a call out XMEDIUS-SIP-CUCM-MGCP-PRI I get a "temporary failure" message in the Q931 debug.
All other PSTN calls work fine.
Calling number is sent as 10 digits and called party is 11 digits, as all other calls the system. Any ideas?
Sep 15 14:31:47.700: ISDN Se0/1/1:23 Q931: TX -> SETUP pd = 8 callref = 0x11BD
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98396
Exclusive, Channel 22
Calling Party Number i = 0x2883, '631XXXXXXX'
Plan:National, Type:National
Called Party Number i = 0xA8, '1631XXXXXXX'
Plan:National, Type:National
Sep 15 14:31:49.071: ISDN Se0/1/1:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x11BD
Cause i = 0x80A9 - Temporary failure
Sep 15 14:31:49.097: ISDN Se0/1/1:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x11BD