10-20-2016 09:33 PM - edited 03-12-2019 01:25 AM
Hello, I got some Meraki MS350-24x and they are supposed to automatically connect to the Meraki dashboard and they do if I connect the directly to the modem but behind the ASA 5512x won't leave the local network
this is what I'm supposed to configure
|
|
|
|
|
|
|
||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||
Your network(s) | 108.161.147.0/24, 199.231.78.0/24, 64.62.142.12/32, 54.193.207.248/32 | 7351 | UDP | outbound | Meraki cloud communication | Access points, Cameras, MX Security Appliance, Phones, Switches | ||||||||||||||
Your network(s) | 17.0.0.0/8 | 443, 2195-2196, 5223 | TCP | outbound | iOS Systems Manager communication | Systems Manager | ||||||||||||||
Your network(s) | Any | 80, 443, 5228-5230 | TCP | outbound | Systems Manager agent communication, Backup Meraki cloud communication, Android Systems Manager communication | Access points, Cameras, MX Security Appliance, Phones, Switches, Systems Manager | ||||||||||||||
Your network(s) | 64.62.142.2/32, 108.161.147.0/24, 199.231.78.0/24 | 993, 7734, 7752, 60000-61000 | TCP | outbound | Backup configuration downloads, Mac/Windows agent communication, Throughput tests live tool, Backup firmware downloads, Mac/Windows remote desktop | Access points, Cameras, MX Security Appliance, Phones, Switches, Systems Manager | ||||||||||||||
Your network(s) | Any | 123 | UDP | outbound | NTP time synchronization | Access points, Cameras, MX Security Appliance, Switches |
.
I thought it would be as easy as adding some lines to an existing ACL but nothing
I tried something like this for instance:
access-list inside_access_in extended permit udp any any eq 7351
Do I need to create some NAT rules?
Can somebody please provide some sample config on the best way to do this?
Thank you