Hi community,
we have a funny thing on a ISR4331
xxx#ping ipv6 www.cisco.com
% Unrecognized host or address, or protocol not running.
xxx#telnet www.cisco.com 80
Trying 0d.0b0d.0b0d.0b0d.0b0d.0b0d, 80 ...
% Connection aborted
xxx#ping www.cisco.com
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 104.97.66.117, timeout is 2 seconds:
.!!..
Success rate is 40 percent (2/5), round-trip min/avg/max = 86/162/239 ms
xxx#
xxx# show version | incl 4b
Cisco IOS XE Software, Version 03.16.04b.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
System image file is "bootflash:isr4300-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin"
xxx#
When we try to telnet to a endhost it's trying a strange address.
Is this a bug ? do you observe something similar on usr ISR4k ?
