We have an ASR1002 running the following:
OS:
Cisco IOS XE Software, Version 03.16.04b.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
ROMMON:
0 07120202 12.2(33r)XNC
R0 08011017 12.2(33r)XNC
F0 07091401 12.2(33r)XNC
We're getting the following during boot, after Image is loaded. My primary concerns are in bold:
Boot image size = 392905340 (0x176b427c) bytes
Missing or illegal ip address for variable DEFAULT_GATEWAY
Using midplane macaddr
Missing or illegal ip address for variable IP_ADDRESS
Missing or illegal ip address for variable IP_SUBNET_MASK
Package header rev 0 structure detected
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
calculated 4894ca48:7b1248b9:2a86204d:1d0c84c9:6df1a148
expected 4894ca48:7b1248b9:2a86204d:1d0c84c9:6df1a148
Image validated
Dec 1 00:21:40.035 R0/0: %BOOT-0-DRV_LOADFAIL: Failed to load driver contdev ( FATAL: Module contdev not found. )
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): tdl_boot_time_resolve took: 108 seconds, expected max time 30 seconds
Dec 1 00:24:21.838 R0/0: %PMAN-3-PROC_EMPTY_EXEC_FILE: Empty executable used for process vman
There is a newer ROMMON image, 16.3(2r), but I wanted to reach out to the community before assuming that was the proper move.
Thanks in advance.
