04-11-2017 07:03 PM - edited 03-18-2019 12:59 PM
Hello.
Is CUCM 9.1.2 compatible with Deploying MCU 5320 as SIP trunk?
When SX20 call to MCU, video can't be sent and received.(only audio)
Is it possible that SX20 call to MCU in the following situation?
If it's possible, What setting should I check?
-Environment
SX20:TC6.3.0 3d8e7d1
CUCM:9.1.2.10000-28
MCU5320:4.5(1.71)
-Setting
SX20 is registered to CUCM.
MCU is connected CUCM on SIP trunk.
-F.Y.I
When DX70 call to MCU, video can be sent and received.
(DX70 and SX20 are set same SIP profile.)
When SX20 call to other endpoint, video can be sent and received.
Thanks.
Solved! Go to Solution.