cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

nexus 3064pq mac filter

acceleration352
Level 1
Level 1

I have a nexus 3064pq (not X) and all the commands related to applying a mac address access list seem to be missing. I have it upgraded to 7.0(3)I4(6) and I can create a mac access list but all the commands related to applying it to a port or vlan seem to be missing. Beside enabling vlan-interface feature to apply it to a vlan I do not see any other related feature to enable here, so I am not sure why the command is missing.

Is somehow a mac - access list not available on a 3064pq switch, it seems odd ip access-group but not mac access-group would be supported on a switch. Is there something I am missing here?

3064PQ-2-56M-ATL(config)# int eth 1/1

3064PQ-2-56M-ATL(config-if)# mac ?
  E.E.E              Static Router MAC (2) address (Option 1)
  EE-EE-EE-EE-EE-EE  Static Router MAC (2) address (Option 2)
  EE:EE:EE:EE:EE:EE  Static Router MAC (2) address (Option 3)
  EEEE.EEEE.EEEE     Static Router MAC (2) address (Option 4)
  ipv6-extract       Extract mac-address (2) from the IPv6 address configured on the interface.

3064PQ-2-56M-ATL(config-if)# ip ?
  access-group  Specify access control for packets
  port          Port policy

3064PQ-2-56M-ATL# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (C) 2002-2017, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source.  This software is provided "as is," and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0  or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://opensource.org/licenses/gpl-3.0.html and
http://www.opensource.org/licenses/lgpl-2.1.php and
http://www.gnu.org/licenses/old-licenses/library.txt.

Software
  BIOS: version 4.0.0
  NXOS: version 7.0(3)I4(6)
  BIOS compile time:  12/05/2016
  NXOS image file is: bootflash:///nxos.7.0.3.I4.6.bin
  NXOS compile time:  3/9/2017 22:00:00 [03/10/2017 02:05:18]


Hardware
  cisco Nexus3000 C3064PQ Chassis
  Intel(R) Celeron(R) CPU        P4505  @ 1.87GHz with 3903304 kB of memory.
  Processor Board ID FOC172125T1

  Device name: 3064PQ-2-56M-ATL
  bootflash:    1638000 kB
  usb1:               0 kB (expansion flash)

Kernel uptime is 0 day(s), 0 hour(s), 34 minute(s), 48 second(s)

Last reset at 10886 usecs after  Sat Jul 29 15:40:41 2017

  Reason: Disruptive upgrade
  System version: 6.0(2)U6(5)
  Service:

plugin
  Core Plugin, Ethernet Plugin

Active Package(s):

Who Me Too'd this topic