10-04-2017 11:39 PM - edited 03-19-2019 12:50 PM
Hello everybody,
i got the following Warnings on my E1 Controller:
Oct 5 06:12:32.657: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Oct 5 06:12:42.905: %MARS_NETCLK-3-HOLDOVER_TRANS: Holdover timer exceeded for Controller E1 0/0/0
Oct 5 06:12:42.905: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 1 to priority 10
Oct 5 06:12:53.405: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned from priority 10 to priority 1
It's an 2951 ISR with an 1MFT T1/E1 Card.
Does anyone know what this means?
Is this an provider problem?
Thanks for helping
Best regards,
Marcel
Solved! Go to Solution.