cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Logger A - configuration checksum for the running Logger did not match

Dear All,

 

I am  getting the below error on Logger -A  CLGR logs.

 

Sync is happening on both the Logger and synchronize the data from B to A and restarted both the Logger service  but still clgr process keep on getting restarted on Logger A .

 

Dumplog for clgr :

09:38:45:430 la-clgr Trace: Synchronizing Configuration Data.

09:38:45:431 la-clgr Trace: DbBind::DbBind: Column name = DateTime, Var Length passed to dbbind = 100.

09:38:45:431 la-clgr Trace: IcmOdbc::CDbProcess::SQLExecDirect sr = 0 select * from Config_Message_Log where RecoveryKey = (select max (RecoveryKey) from Config_Message_Log).

09:38:45:431 la-clgr Trace: LastUpdateKey for A Configuration is 8341174912963.0.

09:38:45:432 la-clgr Trace: LastUpdateKey for B Configuration is 8341174912963.0.

09:38:45:432 la-clgr The configuration checksum for the running Logger did not match with the configuration checksum for the sideA Logger. Use the ICMDBA tool to synchronize the Logger databases.

09:38:52:433 la-clgr Trace: NodeManagerHandler: Logger Performing State Transfer.

 

Even viewer:

The configuration checksum for the running Logger did not match with the configuration checksum for the sideA Logger. Use the ICMDBA tool to synchronize the Logger databases.

 

Please check and advice and how to solve it .

 

Thanks & Regards,

S. Ramamoorthy 

Regards,
Ram.S
Who Me Too'd this topic