12-04-2017 03:48 AM - edited 03-08-2019 12:59 PM
Hello,
I have three cisco 3650 switches that lost power this morning.
Two booted as usual but one of them is stuck in a boot loop.
When connected via console I see this.
Booting...
Interface GE 0 link down***ERROR: PHY link is down
The "IP_ADDR" environment variable is not set.
Getting rest of image
Reading full image into memory...Check base package header ...: done = 16384
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 22300199
Bundle Image
--------------------------------------
Kernel Address : 0x53740388
Kernel Size : 0x34e9e1/3467745
Initramfs Address : 0x53a8ed69
Initramfs Size : 0x119d0be/18469054
Compression Format: mzip
Bootable image at @ ram:0x53740388
Bootable image segment 0 address range [0x81100000, 0x81b8adc0] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 518
Loading Linux kernel with entry point 0x816902d0 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
Booting...
I fail to see how I can interrupt this process or what is actually wrong.
Also I could not find any case here where the boot process was interrupted so early.
Anybody seen this before and know how to resolve this?
Thanks,
Simon