I have a few switches that failed to upgrade from flash:xxxxxxxxxxxxxxxxxx15.2.2-e5.tar
I tried the xmodem process, and file copies successfully & still fails to boot. Next steps?
....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
File "xmodem:" successfully copied to "flash:c2960x-universalk9-mz.152-2.E5.bin"
switch: set boot flash:flash:c2960x-universalk9-mz.152-2.E5.bin
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
ÿ
CPU rev: B
Image passed digital signature verification
Board rev: 25
Testing DataBus...
Testing AddressBus...
Testing Memory from 0x00000000 to 0x1fffffff.../
Using driver version 4 for media type 1
Xmodem file system is available.
Base ethernet MAC Address: f8:b7:e2:5b:d1:80
The password-recovery mechanism is enabled.
USB EHCI 1.00
USB EHCI 1.00
ERR: usbd_bulk_transfer fail status 32
ERR: Read ERROR start 0 blks 1
ERR: usbd_bulk_transfer fail status 8
ERR: usbd_bulk_transfer fail status 32
ERR: Read ERROR start 0 blks 1
ERR: usbd_bulk_transfer fail status 8
ERR: usbd_bulk_transfer fail status 32
ERR: Read ERROR start 0 blks 1
ERR: usbd_bulk_transfer fail status 8
usbflash0: contains unexpected values in partition table or boot sector.
Device needs formatting before use!
USB Console INIT
Initializing Flash...
mifs[5]: 12 files, 1 directories
mifs[5]: Total bytes : 1806336
mifs[5]: Bytes used : 833536
mifs[5]: Bytes available : 972800
mifs[5]: mifs fsck took 1 seconds.
mifs[6]: 2 files, 1 directories
mifs[6]: Total bytes : 3870720
mifs[6]: Bytes used : 1213440
mifs[6]: Bytes available : 2657280
mifs[6]: mifs fsck took 1 seconds.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 8192
mifs[7]: Bytes available : 249856
mifs[7]: mifs fsck took 0 seconds.
mifs[8]: 5 files, 1 directories
mifs[8]: Total bytes : 258048
mifs[8]: Bytes used : 8192
mifs[8]: Bytes available : 249856
mifs[8]: mifs fsck took 0 seconds.
mifs[9]: 650 files, 21 directories
mifs[9]: Total bytes : 122185728
mifs[9]: Bytes used : 46933504
mifs[9]: Bytes available : 75252224
mifs[9]: mifs fsck took 52 seconds.
...done Initializing Flash.
Loading "flash:/c2960x-universalk9-mz.152-2.E6/c2960x-universalk9-mz.152-2.E6.bin"...flash:/c2960x-universalk9-mz.152-2.E6/c2960x-universalk9-mz.152-2.E6.bin: no such file or directory
Error loading "flash:/c2960x-universalk9-mz.152-2.E6/c2960x-universalk9-mz.152-2.E6.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/update/c2960x-universalk9-mz.152-2.E5/c2960x-universalk9-mz.152-2.E5.bin"...Verifying image flash:/update/c2960x-universalk9-mz.152-2.E5/c2960x-universalk9-mz.152-2.E5.bin.........................................................................................................................................................................................................................................................................................................Image failed digital signature verification
Error loading "flash:/update/c2960x-universalk9-mz.152-2.E5/c2960x-universalk9-mz.152-2.E5.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
