06-29-2018 04:57 AM - edited 03-08-2019 03:31 PM
Our Cisco network (attached) will allow me to WOL computers across our subnets, but this will not work after 4 hours (in the morning).
Server with WOL software = 172.16.0.112
Example of workstation to wake = 172.16.10.*
I have done some research but I’m still not confident what settings I would need to change to get this working. What should I adjust and where - Arp cache, Unicast, direct broadcast?
Any advice would be greatly appreciated, and will save the planet of energy wastage :)
Best regards
Craig
Solved! Go to Solution.