Excuse the newbie in me, VLANS are new to me and I decided to create them for the pure reason of security. With all the devices around these days, Echo Dots and so forth, I want these off of my regular network and put into a Virtual Network.
I have a PFSense router box that I made, I have 2 VLANS assigned to one of the interfaces, each with their own DHCP server.
VLAN 10 - 10.0.10.0/24
VLAN 20 - 10.0.20.0/24
From my PFSense I have a connection configured as a trunk port going to my SG220-26 switch. If I configure lets say port 5 on my switch as an access port, my non-VLAN aware device will lose connection. If I configure the port as a general port it connects but to the default VLAN of 1.....
I am at a loss with VLANs, I thought they would be simple to implement, but after a few days I am at the point of walking away.
I know this is only a home network, but I take security seriously and really need some help to get this thing working.
Ask questions and I will provide the details needed.
I appreciate your time in helping me.
